Filters

Www.MetalRoofingScrews.com

28 products

Showing 1 - 24 of 28 products

Showing 1 - 24 of 28 products
View
A #12 diameter metal roofing screw with wings that pierce into wood fibers. The screw is 2 inches long. A #12 diameter metal roofing screw with wings that pierce into wood fibers. The screw is 2.5 inches long.
#12 Winged Metal Building Screws (Wood-to-Metal)
From $44.95
Choose options
A number 12 diameter metal roofing screw that is 1.25 inches long. The screw is used in heavy gauge metal applications, and features a long self-drilling tip. There is a color swatch square in the bottom left corner that shows this screw is Zinc/Unpainted.
#12 x 1.25" ZXL Dome Cap Heavy Gauge Metal Building Screws (Metal-to-Metal)
$69.95
A number 12 diameter metal roofing screw that is 1.5 inches long. The screw is used in heavy gauge metal applications, and features a long self-drilling tip. There is a color swatch square in the bottom left corner that shows this screw is Zinc/Unpainted.
#12 x 1.5" Heavy Gauge Metal Building Screws (Metal-to-Metal)
$59.95
A #14 diameter metal roofing screw with wings that pierce into wood fibers. The screw is 3.25 inches long. A #14 diameter metal roofing screw with wings that pierce into wood fibers. The screw is 3.75 inches long.
#14 Winged Metal Building Screws (Wood-to-Metal)
From $94.95
Choose options
A number 14 Diameter Metal Roofing Screw that is 1.5 inches long with a 5/16 inch Hex Head and an EPDM Rubber Washer. The screw features a Dome Cap that covers the washer and a self-piercing tip for drilling into wood decking. There is a color swatch of the screw head in the bottom left corner and a close-up of the screw head in the top right corner. The screw is Zinc/Unpainted in color. A number 14 Diameter Metal Roofing Screw that is 1.5 inches long with a 5/16 inch Hex Head and an EPDM Rubber Washer. The screw features a Dome Cap that covers the washer and a self-piercing tip for drilling into wood decking. There is a color swatch of the screw head in the bottom left corner and a close-up of the screw head in the top right corner. The screw head is White in color.
#14 x 1.5" ZXL Dome Cap Metal Roofing Screw (Metal-to-Wood)
$79.95
Choose options
A number 14 Diameter Metal Roofing Screw that is 2.5 inches long with a 5/16 inch Hex Head and an EPDM Rubber Washer. The screw features a Type 17 sharp tip for drilling into wood decking. There is a color swatch of the screw head in the bottom left corner and a close-up of the screw head in the top right corner. The screw is Zinc/Unpainted in color. A number 14 Diameter Metal Roofing Screw that is 2.5 inches long with a 5/16 inch Hex Head and an EPDM Rubber Washer. The screw features a Type 17 sharp tip for drilling into wood decking. There is a color swatch of the screw head in the bottom left corner and a close-up of the screw head in the top right corner. The screw head is White in color.
#14 x 2.5" Metal Roofing Screws (Metal-to-Wood)
$59.95
Choose options
A number 14 Diameter Metal Roofing Screw that is 4 inches long with a 5/16 inch Hex Head and an EPDM Rubber Washer. The screw features a Type 17 sharp tip for drilling into wood decking. There is a color swatch of the screw head in the bottom left corner and a close-up of the screw head in the top right corner. The screw is Zinc/Unpainted in color. A number 14 Diameter Metal Roofing Screw that is 4 inches long with a 5/16 inch Hex Head and an EPDM Rubber Washer. The screw features a Type 17 sharp tip for drilling into wood decking. There is a color swatch of the screw head in the bottom left corner and a close-up of the screw head in the top right corner. The screw head is White in color.
#14 x 4" Metal Roofing Screws (Metal-to-Wood)
From $69.95
Choose options
A number 42 Aluminum Pop Rivet with a 1/4 inch grip. There is a color swatch in the bottom left corner. The rivet is White in color.A number 42 Aluminum Pop Rivet with a 1/4 inch grip. There is a color swatch in the bottom left corner. The rivet is Almond in color.
#42 Aluminum Pop Rivets
From $19.95
Choose options
A number 42 Copper Pop Rivet with a 1/4 inch grip. There is a color swatch in the bottom left corner. The rivet is Copper in color.
#42 Copper Pop Rivets
From $27.95
Choose options
A number 43 Stainless Steel Pop Rivet with a 1/4 inch grip. There is a color swatch in the bottom left corner. The rivet is Stainless Steel/Unpainted in color.A number 43 Stainless Steel Pop Rivet with a 1/4 inch grip. There is a color swatch in the bottom left corner. The rivet is White in color.
#43 Stainless Steel Pop Rivets
From $19.95
Choose options
A number 44 Aluminum Pop Rivet with a 3/8 inch grip. There is a color swatch in the bottom left corner. The rivet is White in color.A number 44 Aluminum Pop Rivet with a 3/8 inch grip. There is a color swatch in the bottom left corner. The rivet is Lightstone in color.
#44 Aluminum Pop Rivets
$39.95
Choose options
A roll of 0.025" Painted Aluminum that is Brushed Silver in color.A roll of 0.025" Painted Aluminum that is White in color.
0.025"/0.030" Painted Aluminum Flashing Rolls
From $34.95
Choose options
A roll of painted 26 Gauge Galvanized Steel with a Country Pine Pattern throughout the material, only painted on one side. This material is used for wall flashings, roof flashings, siding, and accents.A close-up of the texture of the Country Pine pattern that was taken from a 12" x 12" square of the material.
26 Gauge Steel Flashing Rolls - Designer Series
From $32.95
Choose options
A number 6 diameter Copper Plated Sheet Metal Screw that is 3/8 inches long. There is a copper color swatch in the bottom left corner. A number 8 diameter Copper Plated Sheet Metal Screw that is 1/2 inches long. There is a copper color swatch in the bottom left corner.
Copper Plated Sheet Metal Screws
From $19.95
Choose options
A Co-Vent Exhaust Fan Vent flashing boot that features a long bottom flange for attaching to flex hoses, and an adapter for 3 inch flex pipes. The vent flashing is Gray in color. A Co-Vent Exhaust Fan Vent flashing boot that features a long bottom flange for attaching to flex hoses, and an adapter for 3 inch flex pipes. The vent flashing is Black in color.
CoVent Metal Roof Exhaust Fan Vent for 3"-4" Flex Hose Exhaust
$134.95
Choose options
A yellow dripless caulking gun that is used to hold and apply caulk and sealant tubes.
Dripless Caulking Gun - ETS1100
From $19.95
Choose options
A group of quick-change driver extensions lined up next to each other. There is a 2 inch long, a 4 inch long, and a 6 inch long extension. A 2 inch long hex bit driver quick-change extension.
Hex Bit Driver Quick-Change Extensions
From $9.95
Choose options
Item Customizations
$0.01
A pipe boot installation kit that includes a pair of nitrile coated gloves, a pack of number 12 diameter self-drilling roofing screws that are 1.5 inches long, and a magnetic hex bit driver. A tube of NPC Solar Seal #900 Caulking/Sealant.
Metal Roof Pipe Flashing Boot Installation Kit
From $27.95
Choose options
A single Snow Guard/Snow Stop that is used to install onto an exposed fastener metal roof panel to help stop or collect snow to prevent the snow from sliding off in sheets, damaging gutters, landscaping, and potentially injuring civilians. The Snow Guard is made from 26 gauge painted steel and is White in color.An infographic showing all of the included components with each Snow Guard. It shows all the different color screws offered for matching to the Snow Guard, the included 1/4 inch magnetic hex bit driver, a 10 oz tube of Clear Sealant, and a 1/8 inch drill bit.
Metal Roof Snow Guard/Snow Stop
From $99.95
Choose options
A multi-function keychain that features multiple hex bit drivers and drill bits for roofing applications. An infographic showing the key chain clipped to a belt loop, and highlighting all of the features it has, such as a durable carabiner with an easy-to-use locking sleeve. It also shows the three different sizes of magnetic hex bit drivers, the masonry bit, the square bit driver, and quick-change extension that are included on the keychain.
Residential Roofer's Multi-Function Key Chain
$24.95
Ridge Vent/Foam Closure Pre-Cut Strips With AdhesiveRidge Vent/Foam Closure Pre-Cut Strips With Adhesive
Ridge Vent/Foam Closure Pre-Cut Strips With Adhesive
From $19.95
Choose options
A shingle step flashing kit that includes shingle step flashing, roofing nails, sheet metal screws, nitrile coated gloves, and a magnetic hex bit driver. The shingle step flashing is used on shingle roofs when installing shingle panels against a wall. The step flashing is made from 26 gauge painted steel and is White in color. A shingle step flashing kit that includes shingle step flashing, roofing nails, sheet metal screws, nitrile coated gloves, and a magnetic hex bit driver. The shingle step flashing is used on shingle roofs when installing shingle panels against a wall. The step flashing is made from 26 gauge painted steel and is Sahara Tan in color.
Shingle Step Flashing- Heavy Duty 26 Gauge Shingle Roof Flashing - 5"x5"x8" Long
From $59.95
Choose options
Size
From $29.95
Choose options

Recently viewed