Filters

All products

101 products

Showing 73 - 96 of 101 products

Showing 73 - 96 of 101 products
View
Hex bit drivers lined up to show that they are offered in different quantities. One hex bit driver is featured in the center to show that it's size is 1/4 inch. Hex bit drivers lined up next to each other to show the multiple quantities offered.
Hex Bit Drivers
From $12.95
Choose options
A multi-size image featuring all four different sizes of hex bit drivers included; 2 inch, 4 inch, 6 inch, and 8 inch.
Hex Bit Drivers (Multi-Pack)
From $19.95
Choose options
Item Customizations
$0.01
A pipe boot installation kit that includes a pair of nitrile coated gloves, a pack of number 12 diameter self-drilling roofing screws that are 1.5 inches long, and a magnetic hex bit driver. A tube of NPC Solar Seal #900 Caulking/Sealant.
Metal Roof Pipe Flashing Boot Installation Kit
From $27.95
Choose options
A single Snow Guard/Snow Stop that is used to install onto an exposed fastener metal roof panel to help stop or collect snow to prevent the snow from sliding off in sheets, damaging gutters, landscaping, and potentially injuring civilians. The Snow Guard is made from 26 gauge painted steel and is White in color.An infographic showing all of the included components with each Snow Guard. It shows all the different color screws offered for matching to the Snow Guard, the included 1/4 inch magnetic hex bit driver, a 10 oz tube of Clear Sealant, and a 1/8 inch drill bit.
Metal Roof Snow Guard/Snow Stop
From $99.95
Choose options
A 3.5 inch long scratch awl used for scoring and marking sheet metal.
Midwest 3-1/2″ Scratch Awl
$25.95
A pair of 8 inch long sheet metal tin snips in the color blue.
Midwest 8" Straight Tinner Snips
$39.95
Two pairs of offset cutting sheet metal tin snips; one left and one right set. An infographic featuring photos of the sheet metal tin snips in use that reads: Hot Drop-Forged Steel Blades for Durability, Serrated Bottom Blades, 1-1/4 inch Sheet Metal Cuts, Proudly Made in the USA with Quality in Mind.
Midwest Aviation Tin Snips - Offset Tin Cutting Shears
From $54.95
Choose options
A 10.3 oz tube of NPC Solar Seal Caulking
NPC #900 Solar Seal Caulking/Sealant
From $69.95
Choose options
A set of PermaCover HVAC Line Set Covers that consists of two 5 FT sections, two end caps, fasteners, and a hex bit driver and masonry bit. The sections are made for covering existing HVAC line sets, and are made of 26 gauge painted steel in the color White. An example of HVAC line sets before and after they are covered with PermaCover HVAC Line Set Covers.
PermaCover HVAC Metal Line Set Covers
From $179.95
Choose options
Two Rain Gutter Valley Splash Guards displayed with several sheet metal screws and a magnetic hex bit driver. There is a color swatch in the bottom left corner. The Splash Guards are Classic Straight in size, and White in color. Two Rain Gutter Valley Splash Guards displayed with several sheet metal screws and a magnetic hex bit driver. There is a color swatch in the bottom left corner. The Splash Guards are Classic Straight in size, and Linen in color.
Rain Gutter Valley Splash Guards
From $29.95
Choose options
Two Rain Gutter Valley Splash Guards displayed with several sheet metal screws and a magnetic hex bit driver. There is a color swatch in the bottom left corner. The Splash Guards are Decorative Straight in size, and White in color. Two Rain Gutter Valley Splash Guards displayed with several sheet metal screws and a magnetic hex bit driver. There is a color swatch in the bottom left corner. The Splash Guards are Decorative Straight in size, and Linen in color.
Rain Gutter Valley Splash Guards - Decorative
$39.95
Choose options
A multi-function keychain that features multiple hex bit drivers and drill bits for roofing applications. An infographic showing the key chain clipped to a belt loop, and highlighting all of the features it has, such as a durable carabiner with an easy-to-use locking sleeve. It also shows the three different sizes of magnetic hex bit drivers, the masonry bit, the square bit driver, and quick-change extension that are included on the keychain.
Residential Roofer's Multi-Function Key Chain
$24.95
Ridge Vent/Foam Closure Pre-Cut Strips With AdhesiveRidge Vent/Foam Closure Pre-Cut Strips With Adhesive
Ridge Vent/Foam Closure Pre-Cut Strips With Adhesive
From $19.95
Choose options
A single piece of Roof Drip Edge Flashing that is used to install over fascia underneath roof shingles to prevent rain water from dripping over fascia. The Drip Edge is made from 26 gauge painted steel and is White in color. A single piece of Roof Drip Edge Flashing that is used to install over fascia underneath roof shingles to prevent rain water from dripping over fascia. The Drip Edge is made from 26 gauge painted steel and is Lightstone in color.
Roof Drip Edge Flashing
From $89.95
Choose options
A group of three Sheet Metal Folding Tools that are used for bending and seaming sheet metal. The three sizes pictured are 12 inches long, 18 inches long, and 24 inches long. A 12 inch long sheet metal folding tool that is used for folding and bending sheet metal.
Sheet Metal Folding Tool
From $19.95
Choose options
A pair of Sheet Metal Hand Benders that is used for bending and seaming sheet metal. The hand benders are 6 inches wide. A pair of Sheet Metal Hand Benders that is used for bending and seaming sheet metal. The hand benders are 3 inches wide.
Sheet Metal Hand Seamers
From $29.95
Choose options
A spring seal large shingle boot made to install on electrical masts on a shingle roof.
Shingle Retrofit Pipe Flashing Electrical Mast Flashing 1/4" - 5 3/8"
$49.95
A shingle roof pipe flashing boot meant to install over pipes on a shingle roof. The boot has a copper base.A shingle roof pipe flashing boot meant to install over pipes on a shingle roof. The boot has a plastic base.
Shingle Roof Pipe Flashing Boots
From $29.95
Choose options
A collection of shingle roof rain diverters in multiple colors. A shingle roof rain diverter that is meant to install over door ways and windows to divert rain water. The rain diverter is made of 26 gauge painted steel and is Black in color.
Shingle Roof Rain Diverters
From $79.95
Choose options
A shingle step flashing kit that includes shingle step flashing, roofing nails, sheet metal screws, nitrile coated gloves, and a magnetic hex bit driver. The shingle step flashing is used on shingle roofs when installing shingle panels against a wall. The step flashing is made from 26 gauge painted steel and is White in color. A shingle step flashing kit that includes shingle step flashing, roofing nails, sheet metal screws, nitrile coated gloves, and a magnetic hex bit driver. The shingle step flashing is used on shingle roofs when installing shingle panels against a wall. The step flashing is made from 26 gauge painted steel and is Sahara Tan in color.
Shingle Step Flashing- Heavy Duty 26 Gauge Shingle Roof Flashing - 5"x5"x8" Long
From $59.95
Choose options
Size
From $29.95
Choose options
A roll of Smooth Finish Aluminum Trim Coil that is most commonly used for wrapping fascia, and door and window trim. The color is White.A close up of the texture of the Smooth Aluminum Trim Coil that is White in color.
Smooth Finish Aluminum Trim Coil
From $35.95
Choose options
A box of Stainless Steel Trim Nails with a pile of loose nails in front of it. The nails are White in color. A box of Stainless Steel Trim Nails with a pile of loose nails in front of it. The nails are Black in color.
Stainless Steel Plain Shank Painted Trim Nails- 1lb
$24.95
Choose options

Recently viewed